HT-Tom

• New model now available, as shown in top centre picture (HT–Tom – full view).

• Single person operation.

• Quick assembly time of approx. 2 minutes, slightly longer if sling removed.

• Cuts and collects the crop in a single pass with negligible plant disturbance or ground compaction.

• Adjustable fingers pick up the crop from the sides of the row and feed it over the cutter bar, ensuring all the crop is cut.

• Adjustable cutter bar height, allowing plants / cuttings to be trimmed to the optimum height/length.

• Circular cutter bar follows contours of shrubs, providing provides better cutting of sides and results in a finished shape pleasing to the eye.

• Adjustable frame height to suit operator, with engine controls on side frame, the operator can walk directly behind the harvester or walk offset in a wheel track.

• Frame is fully zinc plated for low maintenance.

• Quick dismantling of harvester and compact storage – no spanners required! Main wheels have quick release lynch pins allow quick removal and folding of frame for compact storage or easy transporting in a vehicle.

• Heavy duty sling protects collection bag.

• Quick release frame for the collection bag allows easy bag removal. Bag sits on a sling and is attached to the quick release frame with a bungy cord.

• Extra harvesting bags available for different crops.

• Cutting height (at outside edge): adjustable from 100 to 870mm Note: Due to blade curve (1150mm radius) the cutting height is 135mm higher in the centre of the harvester.

• Cutting width: 1210mm

• Wheel track: 1610mm front / 1435mm rear

• Wheel drive: none

• Belt speed: n/a

• Weight, dry: 46Kg

• Collecting bin / bag: supplied bag

• Engine: Husqvarna Zenoah G4K-D (used to be Komatsu Zenoah) 41.5cc air cooled 2 stroke gasoline engine

• Dimensions:

  Width(mm)	Length(mm)	Height(mm)	cu.m(approx.)	Kg(approx.)
  Ready to use	1700	-*	-	-	-
  For freighting (on pallet)	-	-	-	1.70	120

  * including fingers.

Note: Specifications are subject to change without notice. Harvester Concepts implements a continuous product improvement program.

The base price is for the HT-Tom1210 model with a 1210mm cutting width.

Watch videos:

Parts lists are available in PDF format. Please contact us by using the forms in the Contact centre and we'll email you the PDF. If you are not sure which model you have, please state this when enquiring about parts and we will confirm from our records.

When placing a parts order, please quote the parts list drawing title, item number required and quantities.

You can download the following documents:

• Handbook HT Tom (452 KB)
• Handbook HT Tom Special (470 KB)