HT - Shaver - FB (Flat Bed)

Base price: NZ$7200.00

(excl. GST, ex. factory)

Note: NZ delivery typically within three weeks.

Price is for base model:
+$2488 for self propelled
Please enquire for cost of 24v DC version

The HT - Shaver - FB (Flat Bed) harvester is designed for harvesting flat bed or field grown plants. As the engine protrudes out one side, the engine must be in a walkway or over the harvested area of the field. It can also be used on wide raised beds. Due to the frame layout it does not have enough clearance to travel over uncut crop so must be carried over these areas.

Crops harvested include leafy salad plants and low growing herbs such at thyme.

Also available as a self propelled model, and / or with 24v DC power to drive the cutter bar and belt (plus wheels in the case of the self propelled model).

  • Adjustable cutter height from ground level up to 80 mm

  • Engine driven industrial grade conveyor belt only drives when the engine is revved up

  • Holds 2 recrate 75 vege bins

  • Light weight frame zinc plated for durability

  • Easily used by one operator who can walk behind the harvester or offset in a wheel track

  • Cutting action controlled from operator’s position

  • Handlebar doubles as a tow bar so the harvester can be towed out to remote areas


  • Cutting height (above bed): 10 mm (effectively ground level) to 80 mm

  • Cutting width: 1200 mm

  • Wheel track: 990 mm centre lines

  • Wheel drive: none

  • Belt speed: 19.5 m/min max

  • Weight, dry: 42 kg

  • Collecting bin / bag: recrate 45 or 75

  • Dimensions:

    • Ready to use: width = 1685 mm / length = 2380 mm

    • For Freighting (on pallet): 1650 mm (width) x 1705 mm (length) x 850 mm (height) = approx. 2.4 cu.m / approx. 80 kg

  • Engine:

    • Husqvarna Zenoah G23LH-EZ (used to be Komatsu Zenoah) 22.5cc air cooled 2-stroke gasoline engine

    • Fuel / oil mix 25:1

Specifications subject to change without notice. Harvester Concepts implements a continuous product improvement program.

Click on the button below to download a copy of the operator’s manual. Please contact us if you’d prefer a replacement copy to be sent by post.


Refer to the handbook for routine maintenance. The handbook contains spare parts sheets for the cutter bar or drive line.

Parts lists are also available in PDF format. Please contact us by using the form on the Contact page and we'll email you the PDF. If you are not sure which model you have, please state this when enquiring about parts and we will confirm from our records.

When placing a parts order, please quote the parts list drawing title, item number required and quantities.

Preventative Maintenance

You will become reliant on the harvester to do its job and if a breakdown was to occur you could find yourself in an awkward predicament. We recommend regular maintenance to help avoid breakdowns.

As well as the maintenance in the hand book we recommend at least annually, for regular users, stripping the reciprocating gearbox at the end of the cutter bar. Regardless of condition, replace all bearings and the 2 drive links which also hold bearings. Preload the housing with some grease but not full or it can hydraulic and jam the drive.